Silvercrest 338031 2001, Руководство по эксплуатации

Страница: 37 / 146

■ 34
│
GB
│
IE SAST 18 A1
Cleaning
ATTENTION! PROPERTY DAMAGE!
► Do not use aggressive, chemical or abrasive cleaning agents. These could
damage the outer surfaces of the appliance.
Emptying the dirt container and cleaning the filter
NOTE
► To achieve the best results, empty the dirt container
i
and clean the HEPA
filter
z
regularly.
► If you need a new HEPA filter
z
, please contact our service department
(see section “ Ordering spare parts ”).
1) If you have not already done so, disconnect the appliance from the mains
adapter
0
or lift it off the wall bracket
7
.
2) To open the dirt container
i
, press the release button
e
and remove the
dirt container
i
from the appliance.
3) Remove the filter holder
u
together with the HEPA filter
z
from the dirt
container
i
by pulling both straight out of the dirt container
i
.
4) Empty the dirt container
i
.
5) Remove the HEPA filter
z
from the filter holder
u
by turning it
anticlockwise towards the symbol and pulling it out.
6) Tap out the HEPA filter
z
and the filter holder
u
over a rubbish bin. If
necessary, you can rinse out the filter holder
u
and the HEPA filter
z
with
fresh water. Before replacing the parts ensure that they are completely dry.
Do not dry the HEPA filter
z
with hot air.
7) Reinsert the filter holder
u
into the dirt container
i
. Make sure that the
filter holder
u
is straight and that the rubber lip seals the dirt container
i
.
8) Insert the HEPA filter
z
into the filter holder
u
so that the catches on the
HEPA filter
z
fit into the corresponding recesses on the filter holder
u
.
The arrow on the HEPA filter
z
must be aligned with the arrow on the filter
holder
u
. Turn the HEPA filter
z
clockwise towards the symbol.
9) Replace the dirt container
i
on the motor unit
r
:
–
First, place the contacts on the underside of the dirt container
i
onto
the contact pins on the underside of the motor unit
r
. This pushes the
two catches on the motor unit
r
into the recesses on the dirt
container
i
.
–
Press the upper side of the dirt container
i
against the upper side of
the motor unit
r
so that the catch audibly engages. The dirt
container
i
is now firmly seated on the motor unit
r
.