GB
│
MT
│
29
■
SSMS 600 D4
NOTICE
►
NEVER fill the bowl
BEYOND the MAX marking. Otherwise, the
appliance does not function optimally.
■
Place the bowl lid
onto the bowl
and turn it until tight. Thereby, the
lugs on the edge of the bowl
must be guided into the rail on the bowl
lid
. Please ensure that the blade
is correctly engaged in the bowl lid
.
■
Place the motor unit
on the bowl lid
so that the arrow points to the
symbol . Turn the motor unit
until the arrow points to the symbol
.
NOTICE
►
Should you wish to keep foodstuffs in the bowl
you can remove the base
of the bowl
and use it as a lid. For this, carefully remove the bowl lid
and motor unit
and, if needs be, the blade
. Loosen the base of the
bowl
and then place it onto the bowl
.
Operation
WARNING! RISK OF INJURY!
►
Foodstuffs should not be too hot. Squirting contents may cause scalding.
NOTICE
►
When you beat cream with the whisk
hold the container at a slant during
the beating. In this way the cream will be thicker quicker. Ensure that cream
cannot be sprayed out of the container while it is being beaten. When
whipping cream, slide the speed regulator
to position "Max".
When you have assembled the blender set as you wish to use it:
1) Insert the plug into a mains power socket.
2) Press and hold the switch
to process foodstuffs at the standard speed.
Slide the speed regulator
in the direction of “Max” to increase the speed.
Slide the speed regulator
in the direction of “Min” to reduce the speed.
3) Press and hold the turbo-switch
to process foodstuffs at a higher speed.
By pressing the turbo-switch
the maximum processing speed is available
immediately.
4) Once you are done processing the food, simply release the pressed switch
/
.
Содержание 332573 1910
Страница 3: ...D 5 2 1 4 3 8 q 0 A B C 9 6 7 ...
Страница 23: ... 20 IT MT SSMS 600 D4 ...