Silvercrest 312077, Руководство по эксплуатации

Страница: 34 / 58

GB│MT
│
31 ■ SDM 1500 D2
Maintenance/changing the filter
After 4 – 6 months or approximately 100 cleaning cycles (one cycle corresponds
to one water tank filling), you will need to change the filter
7
. Please contact
our Service Department for replacement filters .
RISK OF ELECTRIC SHOCK!
► Before changing the filter
7
, always pull out the mains plug!
1) To remove the filter
7
, first remove the water tank
8
from the appliance .
2) Pull the filter
7
upwards out of the appliance .
3) Insert the new filter
7
.
4) Replace the water tank
8
.
Troubleshooting
Programme Possible causes Possible solutions
The appliance is not working . The plug is not
connected .
Connect the appliance to a
mains power socket .
The appliance
produces no steam .
The "Steam" button
r
has not been pressed .
Press the "Steam" button
r
.
There is no water in the
water tank
8
.
Fill the water tank
8
with tap
water .
The filter
7
is blocked . Change the filter
7
.
No steam setting has
been selected .
Use the MODE button
e
to
select the desired level of steam .
The pump makes unusually
loud noises .
There is no water in the
water tank
8
.
Fill the water tank
8
with tap
water .
A whitish edge forms on the
floor when the appliance stops
briefly during operation .
Lime has collected .
Wipe the limescale away with a
damp cloth . If necessary, add a
little descaler onto the cloth .