Silvercrest 304860, Инструкции по эксплуатации и безопасности

Страница: 10 / 54

10 GB
Q
Weigh and add
The product allows you to weigh foods consecutively
without removing food already in the weighing
bowl
1
.
Place the weighing bowl
1
on the product.
Press the ON / OFF button
2
to switch the
product on.
Select the unit of weight by pressing the unit of
weight button (UNIT) / Timer button
5
as
described in “Weighing” section.
Place the food you wish to weigh in the weigh-
ing bowl
1
.
The LCD readout
4
indicates the weight of the
food in the selected unit of weight.
Now press the TARE button / Timer button
6
.
The numerical display
9
will show zero read-
ing. The TARE symbol
13
will appear.
Now place more food in the weighing bowl
1
.
The LCD readout
4
indicates the weight of
the food you have added in the selected unit
of weight.
Continue in this way only until the maximum ca-
pacity of the product is reached or the weighing
bowl
1
is full.
Q
Remove part of the
weighed food
Place the weighing bowl
1
on the product.
Press the ON / OFF button
2
to switch the
product on.
Select the unit of weight by pressing the unit of
weight button (UNIT) / Timer button
5
as
described in “Weighing” section.
Place the food you wish to weigh in the
weighing bowl
1
.
The LCD readout
4
indicates the weight of the
food in the selected unit of weight.
Now press the TARE button / Timer button
6
.
The numerical display
9
will show zero reading.
The TARE symbol
13
will appear.
Now remove the required amount of food from
the weighing bowl
1
.
The LCD readout
4
will show a negative value
indicated by the minus symbol
12
.
Now press the TARE button / Timer button
6
.
The numerical display
9
will show zero reading.
The TARE symbol
13
will disappear.
Q
Set the countdown timer / alarm
The timer on the product has a time span of 00:10
to 99:50 minutes. The set time is counted down in
reverse to “00:00“. An alarm signal then sounds
and the alarm display
14
flashes.
Press the ON / OFF button
2
to switch the
product on.
Press the Timer button (T-SET)
3
. The alarm
display
14
will appear.
Set the required time by pressing the unit of
weight button (UNIT) / Timer button
5
or
the TARE button / Timer button
6
.
Press the Timer button (T-SET)
3
again to con-
firm the set time and to start the countdown timer.
Press the Timer button (T-SET)
3
again to stop
the countdown timer.
Press the Timer button (T-SET)
3
again to reset
the set time to “00:00“. The alarm display
14
will disappear.
Note: When the set time has elapsed, an alarm
signal sounds.
Press the ON / OFF button
2
to stop the alarm
and at the same time switch off the product.
Q
Display ambient temperature
When the product is switched on, the LCD readout
4
shows the current ambient temperature. This is
indicated by the temperature display
10
in °C.
Q
Switch off the product
The product switches itself off automatically after
90 seconds of inactivity to save energy.
Press the ON / OFF button
2
to switch the
product off manually.