22 GB/IE/NI
Confirm your choice using the START / STOP button
8
or wait 3 seconds. Your choice will then be
saved automatically.
Carrying out the blood
pressure measurement
Place the cuff on your arm as previously described and
assume the position in which you wish to carry out the
measurement.
Switch on the blood pressure monitor using the START /
STOP button
8
.
After the full-screen display, the last measurement result saved
will be displayed. If no measurement has been saved, the de-
vice will display the value of „0“.
The cuff will inflate automatically. The cuff air pressure is
released slowly. If a tendency towards high blood pressure
is detected, the cuff is pumped up once more increasing the
cuff pressure again. As soon as a pulse has been detected,
the pulse symbol will be displayed.
The measurement results for systolic pressure, diastolic pres-
sure and pulse will be displayed.
You can stop the measurement at any time by pressing
the START / STOP button
8
.
If the measurement has not been carried out correctly,
„Er_“ will be displayed (see „Troubleshooting“ also).
Repeat the measurement process in the event that this
happens.
The measurement result will be saved automatically.
Содержание 297903
Страница 3: ...C D B 12 13 14 16 17 18 15 19 20 22 21 A 1 7 2 3 4 5 6 8 9 10 11 ...
Страница 4: ...E F G H I J ...
Страница 36: ...36 ...