Silvercrest 285968, Инструкция по эксплуатации и правила безопасности

Страница: 16 / 62

SilverCrest SHBD 600 A1
14 - English
7.2. Contour cutting
Position the front edge of the blade block (1) at the required level of the hairline. Now move
the hair & beard trimmer evenly in a downwards motion.
7.3. Beard trimming

Comb your beard in the direction of hair growth using the comb (8) provided.

Trim your beard by starting from the ear and working your way downwards. Trim one
side first and then the other.

If you want to cut the beard very short or make contours, use the hair & beard trimmer
without a comb attachment (12).

Adjust the cutting length as required by using the cutting length adjustment switch (2).

To trim a moustache, comb the hair straight down using the comb (8) provided. Start
cutting in the middle above the mouth and work your way from there to one side first,
and then to the other.
8. Cleaning/maintenance
8.1. Cleaning
DANGER! Always remove the mains adapter (6) from the socket and the small
plug on the cable of the mains adapter from the mains adapter port (5) of the hair
& beard trimmer before cleaning commences. Switch off the hair & beard trimmer.
DANGER! Never immerse the hair & beard trimmer in water or any other liquid.

Remove the comb attachment (12), if fitted. The comb attachments (12) can be cleaned
using soapy water. Then dry them well.

The housing of the hair & beard trimmer can be wiped using a slightly damp cloth; never
use any aggressive cleaning agents.

Remove any remaining hair from the blade block (1) using the cleaning brush (10).

For a more intensive clean, you can remove the blade block (1) from the hair & beard
trimmer. Use your thumbs to apply pressure to the white ceramic blade until the blade
block (1) comes off the head of the hair & beard trimmer. Remove the blade block (1).