Silvercrest 275652, Руководство по эксплуатации

Страница: 86 / 114

SRR 3.7 B2
■ 82 │ GB │ MT
NOTE
If...
–
... the shaving result is noticeably poorer, ...
–
... you have to the shave the same spot repeatedly
to achieve a good result, ...
–
... the shave takes much longer than usual, ...
–
... there is visible damage to the shaving heads, ...
... the shaving heads/the cutting unit must be replaced.
You can order the cutting unit , incl. shaving heads from
our customer service (see order card).
To replace the cutting unit
proceed as follows:
1) Press the release button so that the cutting unit
pops open.
2) Overstretch the cutting unit a little so it can be pulled
upwards and off.
3) Fit the new cutting unit onto the shaver. Ensure that it
snaps into place and is seated firmly.
Storage
CAUTION! MATERIAL DAMAGE!
Never store the shaver in the case
.
while the appliance is
charging. Risk of overheating!
■ Always replace the protective cap onto the cutting unit when
you are not using the appliance. Ensure that the corner with the
long plastic sleeve lies above the release button
. Otherwise,
the protective cap cannot be fitted.