Silvercrest 270744, Руководство по эксплуатации

Страница: 10 / 111

GB
│
IE
│
7 ■
SFW 350 C1
5) Place your selected cutting disc into the meat grinder casing so that
the fixings on the cutting disc are located in the openings in the meat
grinder casing .
6) After everything has been correctly assembled, screw the ring clamp
back on hand-tight.
7) The ready-assembled meat grinder casing is connected by a bayonet
connector to the motor block :
– Insert the meat grinder casing into the motor block such that the
arrow on the meat grinder casing lies against the symbol on the
motor unit . The locking button
.
presses itself in (Fig. B).
– Lightly press the meat grinder casing in and at the same time turn
the feeding shaft on the meat grinder casing into the middle position
(Fig. B) so that the arrow on the feeding shaft points to the symbol .
When the meat grinder casing engages, the locking button
.
springs out.
– Finally, place the feeding tray on top of the feeding funnel.
– To dismantle it, press the locking button
.
and turn the feeding funnel
to the right (Fig. B) . You can now pull the meat grinder casing out.
Assembling the sausage stuffer attachment
Unfold the fold-out side - there you will find the step-by-step illustrations for as-
sembling the appliance.
1) Remove the meat grinder casing as described under “Assembling the
meat grinder”.
2) Dismantle all parts which are fitted to/in the meat grinder casing and
clean them.
3) Coat all metal parts with cooking oil.
4) Put the transport screw , the spring and the cross blade back into
the meat grinder casing .
5) Insert the sausage disc 3 so that the fixings on the sausage disc 3 are
located in the openings in the meat grinder casing .
6) Then place the sausage stuffer attachment
-
before the sausage disc
3
.
7) Screw the ring clamp on hand-tight.
8) Assemble the meat grinder casing as described under “Assembling the
meat grinder”.