Silvercrest 106770, Руководство по эксплуатации

Страница: 19 / 145

15
SAR 28 A1
GB
IE
Settings using the SEL button (EQ/LD/TA/AF)
♦ Press the
SEL
18
button on the device. The current bass setting is shown.
Each further press of the
SEL
button accesses the next setting.
The following settings are possible:
BAS - Bass (from -7 to +7)
TRE - Treble (from -7 to +7)
BAL - Balance (sound distribution between the right and left speakers),
from 0L to 9L and 0R to 9R
FAD - Fader (sound distribution between the front and rear speakers),
from 0F to 9F and 0R to 9R
VOL - Volume (from 0 to 20)
♦ Turn the multi-controller
17
to change the settings of the menu item
displayed.
Further settings using the SEL button (EQ/LD/TA/AF)
♦ Hold down the
SEL
button for about 2 seconds and then keep pressing the
SEL
button until the required function is shown on the display.
♦ Turn the multi-controller to change the settings of the menu item displayed.
TA - Enabling / disabling Traffi c Announcement (traffi c information)
TA ON: If TA mode is enabled, the device immediately switches from other sta-
tions or operating modes to the radio station that is currently transmitting traffi c
information. TA is shown on the display.
NOTE
► When the TA function is enabled, you can only search for or save stations
that are transmitting traffi c information. Stations that are transmitting traffi c
information signals are denoted in the display by TP.
TA OFF: The TA function is disabled.
AF - Enabling / disabling Alternative Frequencies
AF ON: When the AF function is enabled, the device searches for the current
station’s optimum frequency.
AF OFF: The AF function is disabled.
EQ - Equaliser
♦ Turn the multi-controller to select one of the
FLAT
,
CLASSIC
,
ROCK
,
POP
or
EQ OFF
settings. No equaliser is enabled if
EQ OFF
is set. The equaliser
setting is shown at the bottom of the display.
IB_106770_SAR28A1_LB3.indb 15 14.11.14 14:31