7
GB/IE
Introduction / Important safety instructions
Introduction
Parts description
1
Control unit (see Fig. A)
2
Function display (see Fig. A)
3
Plug-in connector (see Fig. B)
Scope of delivery
Please check immediately on unpacking that the
delivery scope is complete and that the heated
blanket is in perfect condition.
1 Electric Overblanket
1 Control unit / plug-in connector
1 Set of instructions for use
Technical Data
Model:
SWD 100 C2
Type: B10
Power supply:
230–240 V / 50–60 Hz
Power consumption:
100 W–110 W
Dimensions:
approx. 180 x 130 cm
Protection class:
II /
electric field strength:
max. 5000 V / m
magnetic field strength: max. 80 A / m
magnetic flux density:
max. 0.1 milli-Tesla
Manufacturer:
MGG Elektro GmbH
Steinstraße 27
40210 Düsseldorf, Germany
IMPORTANT INFORMATION –
KEEP THIS SAFE FOR FUTURE REFERENCE!
Important safety
instructions
Failure to observe the following in-
structions can cause personal injury
or property damage (electric shock,
burns, fire). The following safety in-
structions and hazard warnings are
not only intended to protect your own
health and the health of others, but
also to prevent damage to the heated
blanket. Observe this safety advice.
If you pass the heated blanket on
to anyone else, please pass on these
operation instructions as well.
SCALDING HAZARD!
This heated blanket may
not be used by persons insensitive
to heat and other persons in need
of protection who do not respond
to overheating (e.g. diabetics,
persons with skin changes caused
by illness or scarred skin areas in
the application area after using
analgesics or alcohol). There is
a risk of skin burns.
This
heated blanket may not
be used for very young children
(0–3 years), as they are unable
