Silver W-12, Руководство пользователя, Страница: 3 / 16

Contents
Introduction
Thank you for your purchase of the Monitor Audio Silver W-12 subwoofer, which has
been designed and constructed using quality systems and materials to provide years of
enjoyment, reliability and pride of ownership.
The Silver W12 is a completely new and sophisticated design featuring the powerful
control of DSP processing and new driver design. The new 500 watt DSP controlled
amplifier utilizes advanced switch-mode power conversion techniques and superior
processing to increased dynamic control and far greater head-room before any sign of
distortion.
The sealed box construction ensures this powerful combination delivers tight, powerful
bass all the way down to a thunderous 22Hz in a typical room set up.
The W-12 features our innovative Automatic Position Correction (APC) system, developed
completed in house. APC uses a microphone and test tones to automatically calculate
detrimental room modes and automatically correct frequency response, optimizing it for
the room and position. This is a simple and quick automated process that is a complete
revelation to the installer and ensures the user is able to enjoy the sub-woofer quality how
it was intended.
Please read through this manual to familiarise yourself with any safety advice and how to
set up your subwoofer to achieve the very best listening experience.
Please retain this manual for future reference.
Contents 1
Introduction 1
Spiked Foot Assembly 2
For Carpeted Floors 2
Spiked Foot Fixing For Wooden/Hard
Floors
2
Amp Panel 3
Top Control Panel 6
Initial Set Up 7
Power Cycle 7
Set Up 8
Automatic Position Correction 8
Connected to an AV Receiver 9
Connected to a Stereo Amplifier 9
EQ Profiles 10
Additional Information for Auto On/ Off and
Signal Sensing
10
Specification 11
Trouble Shooting 12
Fault Mode 12
Factory Reset 12
Firmware Version 12
Owner Information 13
1