Silver Star SPOT 250, Руководство пользователя

Страница: 8 / 18

5.5 Connection to the mains
Verify the power supply settings before applying power!
If you wish to change the power supply settings,see the chapter Appendix.
Connect the fixture to the mains with the enclosed power cable and plug.
The earth has to be connected!
The occupation of the connection-cables is as follows:
Pin
Cable (EU)
International
Brown
Light blue
ellow/Green
Y
Black
White
Green
Live
Neutral
Earth
L
N
Cable (US)
5.6 DMX-512 connection/connection between fixtures
Only use a stereo shielded cable and 3-pin XLR-plugs and connectors in order to connect the
controller with the fixture or one fixture with another.
DMX-OUTPUT
DMX-input
1
2
3 - Ground
- Signal (-)
- Signal (+)
1
1
2
3
- Ground
- Signal (-)
- Signal (+)
Occupation of the XLR-connection:
XLR mounting-socket: XLR mounting-plug:
Caution: At the last fixture, the DMX-cable has to be terminated with a terminator. Solder a
120 resistor between Signal (-) and Signal (+) into a 3-pin XLR-plug and plug it in the
DMX-output of the last fixture.
Ω
5Pins canon( ) plug
Pin 1: GND(SCREEN)
Pin 2: Signal(-)
Pin 3: )
Pin 4: N/C
Pin 5: N/C
3
Pin 1: GND(SCREEN)
Pin 2: Signal(-)
Pin 3: )
Pins canon(socket)
5Pins canon(socket)
Pin 1: GND(SCREEN)
Pin 2: Signal(-)
Pin 3: )
Pin 4: N/C
Pin 5: N/C
3 plug
Pin 1: GND(SCREEN)
Pin 2: Signal(-)
Pin 3: )
Pins canon( )
The transform of the controller line of 3 pins and 5 pins (plug and socket)