Silver Star SPOT 150, Руководство пользователя

Страница: 6 / 11

INSTALLING THE PROJECTOR
B ra c k e t
F ix in g
H o le
M 8 x 2 5
B o lt
P a s s safety fixing
through these holes
The projector should be mounted via its bracket using one M12 bolt.
The bracket itself attaches to the underside of the projector with two(2)M8x25 bolts
provided.
Always ensure that the projector is firmly anchored to avoid vibration and slipping whilst
operating.
Always ensure that the structure to which you are attaching the projector is secure and is
able to support a weight of 11Kg for each equipment.
For safety the projector should have a secondary fixing with a safety chain through the
holes on the underside of the unit.
WARNING: The projector should NEVER be lifted or carried by the yoke.
FUSE F 6 .3 A /2 5 0 V
F U S E H O L D E R
L
E
N
L = BROWN
E = GREEN/YELLOW
N = BLUE
POWER SUPPLY MAINS
Use the plug provided to connect the mains power to the projector paying attention to the
voltage and frequency marked on the panel of the projector.
It is recommended that each projector is supplied separately so that they may be
individually switched on and off. IMPORTANT It is essential that each projector is
correctly earthed and that electrical installation conforms to all relevant standards. Power
consumption of the equipment is 280W.
CONTROL CONNECTIONS
¾
Connect the XLR-XLR control line from the DMX output of controller to DMX input of
each product and connect the DMX output of the first one to the DMX input of the
second one. Connect all products in this way. Then use the attached circle plug to
connect the signal output of last machine like picture show:
.4.