© 2015 Silv
er P
eak Systems,
Inc
.
PN 200907-001 Re
v
A
1
Approve the Discovered Appliance
After you power on the EdgeConnect appliance, it automatically registers its serial
number with the Silver Peak Cloud Portal. The portal knows how to associate a
serial number with a particular account.
a. Go to the Orchestrator.
b. In the header, click the blinking box named
Appliances Discovered
.
The
Discovered Appliances
page opens, listing the most recently discovered
appliances first.
c. After verifying that the appliance is yours, click
Approve
.
A pop-up box appears, enabling you to assign the appliance to a group.
d. Select the group and click
Apply
.
The Appliance Manager Configuration Wizard opens.
2
Complete the Appliance Manager Configuration Wizard
a. Click
Next
. On the
License & Registration
page, enter your
Account Name
and
Account Key
.
If you’ve also purchased
EdgeConnect Boost
or
EdgeConnect Plus
, and you want to apply it to
this appliance, select the relevant check box(es).
b. Click
Apply
. It may take up to two minutes to register the appliance.
c. Complete the remaining wizard screens.
• On the
Deployment
page’s default configuration, the WAN–side interfaces use DHCP IP
addresses, unless you manually enter static IP addresses.
Before You Begin
Make sure that Orchestrator is
installed and registered.
Verify that you’ve received the
email containing your Account
Name and Account Key.
UNITY
EdgeConnect
Quick Start Guide
Part 2 - Registration
Silver Peak Systems, Inc.
2860 De La Cruz Blvd
Suite 100
Santa Clara, CA 95050
1.877.210.7325 (toll-free in USA)
+1.408.935.1850
www.silver-peak.com/support
