Silver Cross 3D Car Seat, Руководство пользователя

Страница: 6 / 12

6
Installing the 3D Car Seat
ISOFIX Base (continued)
4
While pressing forward on the
adjustment buttons (a) connect the
ISOFIX arms (b) onto the vehicle
ISOFIX points.
5 Firmly pull the base towards you,
making sure that both arms are
connected and check that the
ISOFIX connection indicators are
now showing green. (
parts list
no.3 )
6
Push the base towards and up
against the back of the vehicle
seat. Make sure that the back of
the base is now firmly up against
the rear of the vehicle seat. Check
again that the ISOFIX connection
indicators are showing green. The
base should now be secure and
stable.
Do not place the front
support leg on a floor storage
compartment lid. The front
support leg MUST make full and firm
contact with the vehicle floor.
Make sure that the support leg does
not raise the base from the surface
of the vehicle seat.
Not all infant carrier bases fit
all vehicles. For advice as to
the suitability of this infant
carrier base please consult the
vehicle application list before you
purchase the base and make sure that
the make, model and year of your
vehicle/s is suitable. If you are in any
doubt please contact Silver Cross
customer services on 0845 8726900.
a
b
b
4
5
6