Silvan Selecta WP16-6, Инструкция по эксплуатации

Страница: 6 / 9

To avoid chemical contamination, wear appropriate protective equipment including gloves
whenever maintenance is carried out; turn off the pump and depress the trigger on the spray lance
to dissipate any pressure.
After spraying is completed, drain unused chemicals from the tank. Rinse the tank with clean water
then operate the sprayer with clean water in the tank to clean out the pump, hose and spray lance.
Do not leave chemicals in the tank as they may crystallize or form solids and block in pump, spray
lines, nozzle or filters.
If heavy frosts are experienced, run the sprayer until the pump and spray lines are dry. This will
prevent water freezing in the pump and damaging the sprayer.
Warning! Dispose of unused chemical and water used for rinsing in a manner that will not endanger
people, animals or the environment in accordance with local regulations and the handling and
disposal information available from the Chemical manufacturer.
CLEANING THE FILTERS:
The knapsack has 3 filters that require cleaning. Always use clean water and rinse out the sprayer
after use to avoid filters becoming clogged.
1. Basket strainer under lid. Clean when dirty.
2. Filter in gun handle. Unscrew the hose connection to the gun and withdraw the filter using a pair
of pointy nose pliers and clean.
3. Suction filter inside tank. Unscrew the filter using a pair of pliers grasping it on the hexagonal brass
section against the tank. Withdraw the filter, disassemble and clean. When reassembling do not
over tighten
Maintenance
FILTER INSIDE GUN HANDLE