15m Reel for 200L:
1. Fit the 2 x long brackets to the tank with 4x M8x16mm Bolts, Washer & Spring Washers
2. Fit the upright bracket as shown with 2x M8X25mm Bolts, Washer & nyloc nuts
3. Fit Hose reel to the upright bracket using 2x M8X25mm Bolts, Washer & nyloc nuts.
4. Loop the inlet hose under the reel and cut hose to suitable length to meet the pumps inlet (allow
length for the hose to swivel). Fit elbow hose tail and hose clamp then fit to pump
Fitting The Spray Gun:
Different model sprayers feature different spray guns and have different inlets.
Method 1.
Fit direct to hose. The PA spray gun can be directly fitted to the
¼”
fitting on the hose reel. (Requires
old existing fitting to be removed).
Method 2.
Cut the hose. The Triam and Spotjet spray
gun both have ½”
connections which do not directly fit
to the h
ose reels ¼” fitting. Remove any existing hose connections to the spray
gun. Cut the swaged
fitting from the hose reel then fit spray gun using the included hose tail
Special Installation
–
Hose Reel Kit
1
2
3
4
