After spraying is completed, drain unused chemicals from the tank. Rinse the tank with clean water
then operate the sprayer with clean water in the tank to clean out the pump, hose and spray lance.
Do not leave chemicals in the tank as they may settle and form solids that may block the filter.
If heavy frosts are experienced, run the sprayer until the pump and spray lines are dry. This will
prevent water freezing in the pump or spray lines and damaging the sprayer.
Warning!
Dispose of unused chemical and water used for rinsing in a manner that will not endanger
people, animals or the environment in accordance with local regulations and the handling and
disposal information available from the Chemical manufacturer.
CLEANING THE FILTER
To check the filter, remove the filler cap and hook the suction hose out with a bent piece of wire.
To avoid chemical contamination do not put bare hands in the tank to remove the filter. Appropriate
protective equipment including gloves should be used whenever maintenance is carried out. Clean
the filter with a bristle brush, do not use a wire brush or sharp object as this may damage the mesh.
The filter can be pulled from the suction hose if necessary, for cleaning. When reinstalling the filter
in the tank press the suction hose into the recess to keep the filter on the bottom of the tank so
that it will fully empty.
Operation (cont.)
Maintenance
