After spraying rinse out the spray lines and tank with clean water
CLEANING THE FILTER
To check the filter, remove the filler cap and hook the suction hose out with a bent piece of wire. To avoid chemical
contamination do not put bare hands in the tank to remove the filter. Appropriate protective equipment including gloves
should be used whenever maintenance is carried out. Clean the filter with a bristle brush, do not use a wire brush or sharp
object as this may damage the mesh. The filter can be pulled from the suction hose if necessary for cleaning. When
reinstalling the filter in the tank press the suction hose into the recess to keep the filter on the bottom of the tank so that it
will fully empty.
Maintenance
