DG559 Technical reference manual
4. Installation and precautions
Make sure that the mains voltage is switched off when making any connections.
Use 0,75- 1,5 mm2 solid or stranded conductor electrical wires.
Connect wires as shown in
wiring diagram
paragraph and tighten the connector screw.
Make sure to connect the input and outputs correctly.
Mains input connector is marked with letters L and N.
Connect 0-10V dimmable light to 0-10V DG559MB04A1A01 output connectors paying attentions to
the correct polarity.
Notes
:
DG559MAB04A1A01 is a built-in class II device. Use double insulated wires or an external mounting box if
the device is not mounted inside another insulated device.
Make sure that the ambient temperature does not exceed the specified maximum value.
[email protected] www.dglight.eu
page
6
