INSTALLATION INSTRUCTION
First:Installation hydraulic
pump to the base
Parts needed: Base + pump
+ foot bar
Step 1:Install pump to Base
with 6 fixing bolts .
Step 2: Place assembled
Base & Pump on floor. Use
Allen Wrench to loosen the
screws
in the crossbar. See photo
besides.
Insert Foot Bar into the holes
of the crossbar.
(May require slightly
squeezing ends of Foot Bar
towards each other, and
some maneuvering for the
bar ends to go into place.)
Step 3. Tighten the set
screws to firmly hold the Foot
Bar in place.
Second：Install handrests
to the seat
Parts needed: right handrest
+ left ha seat
Step 1 . Remove the 6
Screws which Pre-fixed on
the handrests
Step 2 . Install handrests to
the seat with the 6 screws.
Please follow up the diagram
beside
3
