3
English
Installing batteries:
1. Make sure Silk’n Swirl is turned off.
2. Remove the outer battery compartment cover by depressing the cover tab and pulling
the cover away from the device.
3. Open the inner battery compartment cover and insert two new AA batteries (included).
Use the markings in the battery compartment as a guide to position the +/- end of the
batteries.
4. Replace inner battery compartment cover and press firmly to seal.
5. Replace the outer battery compartment cover by aligning the lower tab into slot and
pressing firmly to close.
If the device has difficulty functioning, try inserting new batteries before returning it.
Do not mix old and new batteries.
Do not mix alkaline, standard (carbo-zinc) or rechargable (nickel-cadmium) batteries.
To dispose of alkaline batteries, place in the trash (normal municipal waste). Recycling of
batteries at your local recycling center is good for the environment.
Installing the brush head:
1. Gently pull brush head to remove it.
2. Press the brush head (included) onto the connection pin until it locks into position with a click.
For Best results, replace the brush head every three months, or sooner if the bristles
become depressed.
Additional replacement brush heads are sold separately.
Warning:
For External use only.
Keep out of reach of children.
Please be sure to use as directed.
Avoid contact with eyes.
Do not use Silk’n Swirl without replaceable brush head attached.
As with any product, discontinue use if rash, redness or itching occurs.
Consult physician if irritation persists.
Avoid direct contact with eyes and hairline/hair.
If skin irritation or redness occures, discontinue use.
As this product increases exfoliation effect of facial cleansers, it may also increase your
skin’s sensitivity to the sun.
ON/OFF (and)
Hight/Low Speed
Control
Silk’n Swirl can be used daily, morning and night, but if you have especially sensitive skin or
other skin concerns, talk to your doctor or dermatologist about frequence of use.
