22
Silk’n Flash&Go™ pulses should be administered in rows,
starting at one end of each row and progressing sequentially
towards the other end. This technique allows better control of
skin coverage, and helps you avoid treating the same area more
than once or overlapping skin areas.
When applied to the skin, the Silk’n Flash&Go™
TREATMENT
SURFACE
is designed to create temporary pressure marks on
the treated area. These visible marks can be used for proper
positioning of the next pulse.
If your skin blisters or burns, STOP USE IMMEDIATELY!
Try to avoid overlapping pulses!
14.
Repeat the process until the entire treatment area is covered.
Warning: Do not treat the same area of skin more than
once per hair removal session!
Treating the same area of skin more than once per
session increases the likelihood of adverse effects.
