4.3.3. Milking procedure
During milking the following screen is displayed:
Ab-
nahme:
manual
detachment of the milking cups together with start of the intermediates
disinfection
Stopp:
after the detachment the process can be stopped until the lowering of
the hoses for disinfection.
Stimulation:
turn off the stimulation (for example for cars with small teats)
Hand
:
deactivates the detachment automatic and skips the pre-stimulation
:
⬆
move hoses upwards when touching the floor
:
⬇
moves hoses downwards, when too short (to this end pull gently)
Links:
m
anual gate control, left-hand side
Rechts:
manual gate control, right-hand side
+++:
milking box is blocked for automatic (button turns red when box is
blocked)
Tierkennung:
upon touching the animal number may be entered or corrected manu-
ally (until detachment)
-note: Multilactor® comprises an automatic vacuum switch-off as soon as air enters
the milking cup (drop of a milking cup or 3-teat cow). Upon re-attaching the cup the
vacuum is switched on again. Upon operating the knee switch a forced vacuum is
switched on.
The milking procedure is divided into the following sub-steps:
©Siliconform GmbH & Co. KG, 2013, all rights reserved subject to technical changes (11.12.2013)
information re the
boxes on the left-
hand side.
Information re milk-
ing boxes on the
right-hand side.
Display of the milking
box, in which an animal
is waiting for attaching
milking
cups.
Display of milking
parameters
