Getting Start
RE31
USER MANUAL
RE31 Mini Reader
PROPRIETARY AND CONFIDENTIAL
7
USER MANUAL RE31
11, 202
V1.0
Copyright © 2020 Silicon Craft Technology PLC
2.
Getting Start
Before user can operate RA12 Mini Reader, proper operational environment and the
following requirements must be prepared.
2.1.
System and Hardware Requirements
•
Computer
:
PC with USB Port
•
Operating System
:
Window XP, Window 7, 8, 10
•
Software Requirement
:
Hyper Terminal, Tera Term, Putty, MobaXterm, etc.
•
Others
:
ISO14443A/B or ISO15693 Card or Tag.
2.2.
Software Setup
2.2.1.
Serial Communication Configuration
To communicate with the reader, user must establish a serial connection. The setting
below is to config the serial session to match the reader communication configuration.
•
Serial Port
:
Select COM Port which match to USB to UART converter
•
Baud Rate
:
115200 bps
•
Data
:
8 bits
•
Parity bit
:
None
•
Stop bit
:
1 bit
2.2.2.
Terminal Software (MobaXterm)
To interact with the reader, a terminal software is needed. Generally, any terminal software
is compatible. However, we will use MobaXterm as an example terminal software to communicate
with the reader in this case.
Figure 2-1 MobaXterm
