Innovative Solar Solutions | 2917 State Hwy 7, Bainbridge, N.Y. 13733 | Ph: 800.786.0329 | www.SiliconSolar.com
3. OPERATION
There are three dials located on the PIR section of the light these are used to adjust sensitivity (DISTANCE),
lighting time (TIME) and darkness levels (LUX) .These are all adjustable with the PIR dials
1) Sensitivity (distance)
Distance the light can be activated by motion is
approx 3 to 10 meters.
2) Lighting time (time)
Preset lighting time is 1~4 minutes.
3) Darkness (lux)
The ambient luminance when the light can be
activated by motion.
a. Twist to the maximum, lamp will be only
activated in dark. (
Factory preset
)
b.
If you want it working in environment of little light, please adjust the “LUX” button or twist it the
minimum if you want it working in environment of strong light (daytime).
4. TROUBLESHOOTING INFORMATION
The performance of solar powered motion-sensor light depends upon the amount of sunlight available during
daylight hours to charge the batteries to enable nighttime operation. If it is not functioning properly, use the list
below to find and correct the problem.
1)
Make sure the solar panel box is located in an area where the solar panel gets the maximum amount of
sunlight every day.
2)
If the weather has been rainy or overcast for a period of long time, the battery will not be charged for
operation at night. This is normal.
3)
Dirt build-up on the solar panel will not allow the battery to fully charge. This will cause the light to
malfunction.
a. Clean
it regularly with a dampened cloth or paper towel. Don’t use strong detergents or acid
based cleaners.
4)
If everything ab
ove doesn’t make your light work, the battery needs replacement.
