EasyRadar Sensor Evaluation Kit
- 14 -
3D- Chart:
in 3D-view you can see the history of data,
with the z-axis being the time line, so older
values move to the back (higher z-values).
X and Y like in 2D mode.
Phasemarkers:
as an extra option you can select to display
phase markers on each recognized target.
These markers show the phase angle of the
detected target. The phase angle is very
sensitive to slight changes of the target
distance within one range bin. It can be used
to display relative motion in the µm range.
3.4 Status field and Target list:
Statusfield:
distance in: [mm,cm, bin] the format which the sensor
specifies in the statusframe.
accuracy: the width of one range bin of the sensor. It is
calculated using the following formula:
update rate: calculated from the TSLM-value („Time since
last measurement“) which the sensor sends in milliseconds in
the statusframe
gain: gain setting of the baseband amplifier in dB
bandwidth: the chirp bandwith
Target list:
The target list is ordered by distance. With every new
measurement having the CFAR operator enabled, the target
