ZigBee RangeFinder
©2016 Silicon Labs
-35-
Telegesis ZigBee RangeFinder
PAN Scan results screen
.
Once the PAN scan is started handheld unit will continuously scan and update the
information about PANs found on the screen. As many as 50 PANs can be discovered using this
tool. The PAN list will update dynamically when the new PAN is found. The network found with
permit join true is given higher priority in the list and will sit at the top of the list.
Pan change indications
Once a new network is found with permit join true OR if an existing network changes it
permit join state from N to Y, the HHT will beep 5 times and flash blue backlight for
indication.
If a new network is found with permit join false, it will be added to the list just after the
existing PANs with permit join true, there will not be any indication for the new network
found with permit join false, however if an existing network changes its state from Y to N, a
long beep of 5 sec along with red backlight flash will indicate this change.
After 2.5 minutes of permit join turning to Y the join window indicator will turn ON and HHT
will beep 5 times and flash blue backlight just as when a new PAN with permit join is
detected to indicate that the permit join is still true on the network to make the operator
aware of extended join window opening.
CH PANID JN JC RS W
e
One Hop Results
PAN’s found: 1 of 3
19 745F Y 2 -43 |
20 6678 Y 2 -12 |
24 ABCD N 0 -23
Results
18 C234 N 2 -75
e
One Hop Results
CH
– ZigBee Channel number for the PAN found
PANID
– PAN Id of the PAN found
JN
– Permit join state of the PAN found
Y if permit join is true
N if permit join is false
JC
– Join counter which increments each time the permit join
state changes from N to Y
RS
– RSSI value of the PAN
W
– Join window which changes its state automatically 2.5
minutes after the permit join status changes from N to Y
