manualshive.com logo in svg

Silicon Laboratories EFR32 1 Series, Руководство по проектированию оформления

Поделиться
Скачать
Silicon Laboratories EFR32 1 Series Скачать руководство пользователя страница 1

AN928.1: EFR32 Series 1 Layout Design
Guide

The purpose of this application note is to help users design PCBs
for  the  EFR32  Wireless  Gecko  Portfolio  using  design  practices
that allow for good RF performance.

The  2.4  GHz  matching  principles  are  described  in  the  application  note, 

AN930.1:

EFR32 Series 1 2.4GHz Matching Guide

, and the matching process for the sub-GHz

section  is  discussed  in 

AN923:  EFR32  sub-GHz  Matching  Guide

.  The  MCU-related

subjects  are  detailed  in  the  following  application  notes: 

AN0918.1:  MCU  Series  0  to

EFM32GG1x/TG11 Compatibility and Migration Guide

, 

AN0948: Power Configurations

and DC-DC

, and 

AN0955: CRYPTO

.

The Silicon Labs MCU and Wireless Starter Kits and Simplicity Studio provide a power-
ful development and debug environment. In order to take advantage of the capabilities
and features on custom hardware, Silicon Labs recommends including debugging and
programming interface connector(s) in custom hardware designs. The details and ben-
efits of including these connector interfaces are detailed in 

AN958: Debugging and Pro-

gramming Interfaces for Custom Designs

.

The  power  configurations  and  the  proper  usage  of  the  internal  DC-DC  converter  of
EFR32  is  described  in 

AN0948:  Power  Configurations  and  DC-DC

.  The  RF  perform-

ance strongly depends on the PCB layout, as well as the design of the matching net-
works. For optimal performance, Silicon Labs recommends using the PCB layout de-
sign guidelines described in the following sections.

KEY POINTS

• Provides a reference schematic and PCB

layout

• Lists and describes all main design

principles

• Provides a summary checklist of all design

principles

silabs.com

 | Building a more connected world.

Rev. 0.5 

Содержание EFR32 1 Series



















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды