C P 2 11 2 - E K
4
Rev. 0.2
10. Figure 4 shows the Pin Configuration tab, which allows you to configure the GPIO and Special Functions
(TX Toggle, RX Toggle, and Clock Output).
a.
GPIO pins toggle between Input/Ouput and Open-Drain/Push-Pull by clicking the corresponding GPIO boxes in the
“GPIO Configuration” section. The boxes for TX Toggle, RX Toggle, and Clock Output can be checked to enable the
Special Functionality. The “Set GPIO Config” button must be clicked in order for the settings to change.
b.
The “Latch Values” section allows for the GPIO latches to be read or written to. Clicking the box next the GPIO pins
listed will scroll through “1”, “0”, and “X”. Write Latch must be clicked to change the state of the GPIO latch.
Figure 4. Pin Configuration Tab
