manualshive.com logo in svg

Silicon Image SATA RAID FOR SILICON IMAGE, Руководство пользователя

Поделиться
Скачать
Silicon Image SATA RAID FOR SILICON IMAGE Скачать руководство пользователя страница 45

 

SATARaid User’s Manual 

 

Copyright © 2003 Silicon Image Inc. 

45 

10 RAID Set Management Under Windows 2000 & XP 

Selecting the RAID Management command or toolbar button causes a RAID Configuration Wizard to open. Click Next to go 
the Main Operation Menu screen. 

NOTE:

 Modifying RAID Sets may result in the existing data on the affected drives being permanently lost. Make sure all data 

is backed up prior to executing any operation described in this section. 

 

Menu selections that are available depend on the number of drives available and whether any RAID sets  currently exist. The 
commands available from within the Wizard are: 

Create RAID Set

 is used to create a new RAID 0, 1, or 10 Set. 

Delete RAID Set

 is used to delete a RAID Set or to deallocate a spare RAID 1 drive. 

Modify RAID Set

 allows certain parameters  of the RAID Set, such as rebuild rate for RAID 1, to be modified. 

Create Spare Drive For RAID 1

 is used for allocating a spare drive to a RAID 1 set. 

Delete Spare Drive 

removes the allocated spare drive from a RAID 1 set. 

These operations are detailed in the pages that follow. 

Содержание SATA RAID FOR SILICON IMAGE


































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды