Silicon Graphics Zx10, Руководство пользователя

Страница: 27 / 78

Memory Modules
007-4330-002 13
• Do not bend, twist, drop, or otherwise handle the DIMM carelessly.
• Do not expose the DIMM to moisture or extreme temperatures.
When adding or replacing system memory on all system boards:
• Install DIMMs first in Bank 3, then in Bank 2, and finally in Bank 0.
• Do not replace DIMM terminator modules in Bank 1 with standard DIMMs.
• Ensure all installed DIMMs are PC133 (133 MHz). Do not mix DIMMs of different
speeds.
• Use only registered DIMMs. Do not use unbuffered DIMMs.
• Install DIMMs in both sockets of a bank. Do not install only one DIMM in a bank.
• Install the same size DIMM in both sockets of a bank. You can vary DIMM sizes
from bank to bank, but not within a bank.
A system board can have up to 6,144 MB of system memory, in increments of 256 MB, 512
MB, and 1,024 MB. The following are common configurations.
Table 2-1 Memory Configurations
Memory Bank 3 Bank 2 Bank 0
256 MB 2 x 128 MB
512 MB 2 x 128 MB 2 x 128 MB
2 x 256 MB
768 MB 2 x 128 MB 2 x 128 MB 2 x 128 MB
2 x 128 MB 2 x 256 MB
1,024 MB 2 x 128 MB 2 x 128 MB 2 x 256 MB
2 x 256 MB 2 x 256 MB
2 x 512 MB
2,048 MB 2 x 256 MB 2 x 256 MB 2 x 512 MB
2 x 512 MB 2 x 512 MB
2 x 1,024 MB
3,072 MB 2 x 512 MB 2 x 512 MB 2 x 512 MB