Silicon Graphics VBOB, Руководство пользователя, Страница: 19 / 40

007-4243-002 5
Chapter 2
2. Rackmounting and Hardware Overview
This chapter describes the VBOB hardware. The first section shows you how to mount
the VBOB unit in a rack, and the following sections explain the theory of operation.
Mounting VBOB in an SGI 3000 Series Rack
You can install the VBOB chassis as a free-standing table-top unit, or mount it in a rack.
This section explains how to install the VBOB chassis in an SGI 3000 series rack. Before
you begin, make sure that you have the hardware listed in Table 2-1.
Warning:
Personnel could be seriously injured and equipment could be damaged if
the rack topples over. Install all equipment into the rack from the lowest available
position. Also, make certain that the rack has sufficient power for the VBOB’s needs.
Check with the appropriate facilities authorities before installing this unit in a rack.
Note:
This installation requires two people and a #2 Phillips screwdriver.
This procedure presumes that internal rackmounting rails are already installed and that
a vertical space of 3.5 in. (8.9 cm) is available.
Table 2-1 Rack Installation Hardware for VBOB
Part Description Quantity
10-32 x 1/4 in. screws 4
Front mounting brackets 1 pair