Silicon Graphics Rackable H2106-G7, Руководство пользователя системы

Страница: 39 / 112

Install the System into a Rack
007-5683-004 15
Install the Server in a Rack
Warning:
The SGI Rackable H2106-G7 server weighs up to 69 lbs (27.2 kg) Always use
proper lifting techniques when your move the server. Always get the assistance of another
qualified person when you install the sever in a location above your shoulders. Failure to do
so may result in serious personal injury or damage to the equipment.
You should now have rails attached to both the server chassis and the rack unit. The next step is
to install the server into the rack (refer to
Figure 2-2 ).
1. Extend the outer rails as shown in Figure 2-2 .
2. Align the inner rails of the chassis with the outer rails on the rack.
3. Slide the inner rails into the outer rails, keeping the pressure even on both sides. When the
chassis has been pushed completely into the rack, it should click into the locked position.
4. Screws are recommended to secure and hold the front of the chassis to the rack.
Figure 2-2
Installing the Server in a Rack
!