Silicon Graphics Rackable C2005 2U Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 46

background image

COPYRIGHT

© 2012 SGI. All rights reserved; provided portions may be copyright in third parties, as indicated elsewhere herein. No permission is granted to copy, distribute,
or create derivative works from the contents of this electronic documentation in any manner, in whole or in part, without the prior written permission of SGI.

LIMITED RIGHTS LEGEND

The software described in this document is “commercial computer software” provided with restricted rights (except as to included open/free source) as specified
in the FAR 52.227-19 and/or the DFAR 227.7202, or successive sections. Use beyond license provisions is a violation of worldwide intellectual property laws,
treaties and conventions. This document is provided with limited rights as defined in 52.227-14.

The electronic (software) version of this document was developed at private expense; if acquired under an agreement with the USA government or any
contractor thereto, it is acquired as “commercial computer software” subject to the provisions of its applicable license agreement, as specified in (a) 48 CFR
12.212 of the FAR; or, if acquired for Department of Defense units, (b) 48 CFR 227-7202 of the DoD FAR Supplement; or sections succeeding thereto.
Contractor/manufacturer is SGI, 46600 Landing Parkway, Fremont, CA 94538.

TRADEMARKS AND ATTRIBUTIONS

Silicon Graphics, SGI, the SGI logo, Rackable, Roamer, and Supportfolio are trademarks or registered trademarks of Silicon Graphics International Corp. or
its subsidiaries in the United States and/or other countries worldwide.

Intel and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.

AMD Opteron is a trademark or registered trademark of Advanced Micro Devices Corporation.

PCIe is a registered trademark of PCI SIG.

All other trademarks mentioned herein are the property of their respective owners.

Adaptec, HostRAID, and the Adaptec logo are registered trademarks of Adaptec Inc.

«
1
2
3
4
...
»

Содержание Rackable C2005 2U















































Отзывы:

Нет отзывов

Похожие инструкции для Rackable C2005 2U

Бренд: PaloAlto Networks Страницы: 30

Бренд: SafeNet Страницы: 109

totalstorage 200

Бренд: IBM Страницы: 180

Бренд: Kontron Страницы: 110

Бренд: IEI Technology Страницы: 34

xPico XPW100A003-01-B

Бренд: Lantronix Страницы: 54

Бренд: PRIMERGY Страницы: 87

Бренд: LiveU Страницы: 14

Бренд: TYAN Страницы: 70

Crestron 908012

Бренд: SIERRA VIDEO SYSTEMS Страницы: 32

Бренд: 7thSense Страницы: 28

Бренд: Icy Box Страницы: 3

Бренд: Cavalry Страницы: 16

Бренд: Acer Страницы: 52

Бренд: Acer Страницы: 94

Altos R700 Series

Бренд: Acer Страницы: 135

Бренд: Acer Страницы: 10

Бренд: Acer Страницы: 148

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды