4
007-5716-001
1: Overview
Table 1-1
describes the various components illustrated in
Figure 1-1
.
Table 1-1
Front Panel Components
Component Description
LED indicator lights
These LEDs provide you with critical information related
to different parts of the system.
Green (PWR): The LED farthest to the left indicates that
power is applied to the server and the system is on. When
the LED is off, the system is off, even if the AC power cord
is plugged into the server.
Blue (HDD): The LED in the middle indicates that the
hard drive(s) are currently being accessed and activity is
occurring.
Red/Tri-color (ID2): The LED to the far right may have
several functions depending on the configuration of your
server. If your server was purchased with the Roamer
remote management module, then this LED can be turned
on or set to blink via Roamer so that a technician can easily
identify a unit that may need service.
Power button
This single-push, push button is a power on/off button.
When the system is in an off state, pushing the button once
powers the system on. When the system is in an on state,
pushing and releasing the button power the system off.
This button does not have a reset function.
Serial Connector
This port is accessed with an RJ-45 connector. When the
Roamer remote management module is installed, this port
functions as an interface to the module. When the Roamer
remote management module is not installed, the pinout for
the serial connector is as shown in
Table 1-2
.
