Silicon Graphics Presenter, Руководство пользователя

Страница: 23 / 60

Setting Up the Presenter on the Dukane Customized Projector
11
9. Remove the backlight panel from Presenter.
■
Place it face down on a flat surface.
■
Press in the latches on either side of the panel and tilt it up and
remove it. See Figure 1-5. This automatically turns off the
Presenter’s backlight.
Caution: Do not place Presenter with the backlight panel attached on
an overhead projector that is turned on. This causes overheating, and
will damage Presenter.
Figure 1-5 Removing the Backlight Panel
10. Carefully place the backlight panel on a surface where it will not get
damaged or scratched. Scratches will not affect performance, but if they
are large enough, you will see them through the display. Do not touch
the coated-glass surface of the display with your hands or with any
instrument. Even a pen tip can scratch the surface.
Latches