Silicon Graphics Origin200, Руководство пользователя

Страница: 55 / 288

29
Chapter 2
2. Setting Up an Origin200 System
This chapter describes how to set up a one- or two-module Origin200 system. It includes
the following sections:
• “Choosing a Location for the Server,” which includes information on the weight of
the system, minimum space requirements, and requirements for proper grounding
(earthing)
• “Putting the Pieces Together,” which includes:
– “Overview of the System Connectors and Ports” on page 36
– “Safety Considerations” on page 37
– “Assembling the Server” on page 37
– “Installing 3.5-Inch Drives” on page 38
– “Installing 5.25-Inch Drives” on page 41
– “Attaching an Ethernet Networking Cable” on page 50
– “Attaching the System Console” on page 51
– “Connecting Two Origin200 Modules” on page 52
• “Turning On the System” on page 57
• “Logging In for the First Time” on page 59
Specific information about mounting an Origin200 module in an equipment rack is
provided in Chapter 3, “Installing an Origin200 System in a Rack.”
Caution: When installing a two-module system, all chassis must be connected to the
same grounded power supply. If the chassis are not all connected to the same power
supply, resulting differences in ground potential (current) can damage components on
the Origin200 main system board.