Silicon Graphics IRIS Workstation, Руководство пользователя

Страница: 11 / 170

Version 1.0
IRIS WORKSTATION GUIDE 7 IRIS Workstation Specifications
• 1 15-conductor drop cable connects the Cabinet to an Ethernet
transceiver.
3.3 Cables
Each IRIS Workstation is supplied with a cable set for connecting the IRIS
Workstation components.
• 4 bundled, color-coded, coaxial video cables connect the video
output of the Cabinet to the Monitor.
• 1 25-conductor control cable connects the Cabinet to the Monitor.
This cable sends and receives signals between the Cabinet and the
Mouse, Keyboard and
Reset
button on the IRIS Control Panel.
• 2 10-foot, 3-wire, grounded AC power cables provide power for the
Monitor and Cabinet.
• 1 37-pin flat cable connects the Dial Box to the Switch Box.
• 1 9-pin cable connects the Switch Box to
Port 4
on the Cabinet I/O
Panel.
• 1 3-wire AC power cable provides power for the Dial Box and the
Switch Box.
3.4 Monitor
The Monitor has two control panels, the IRIS Control Panel on the front left
and the Monitor Control Panel on the front right. On the back of the Monitor
are several ports for receiving video signals, a power socket and a control cable
port.
IRIS Control Panel
The IRIS Control Panel has two ports for connecting the Keyboard and Mouse
to the Monitor, a
Reset
button and two indicator lights (see Figure 3-2).
• 1 DIN socket labeled
Keyboard
is a port for connecting the Keyboard
to the Monitor.
• 1 slide-locking D socket labeled
Mouse
is a port for connecting the
Mouse to the Monitor.
• 1 LED labeled
Power
indicates that power for the Cabinet is switched
on.
• 1 LED labeled
Halt
indicates that the processor is stopped.
• 1
Reset
button is located on the IRIS Control Panel. Pressing this
button resets the processor which in turn resets the rest of the
system. After the
Reset
button has been pressed, the IRIS