manualshive.com logo in svg

Silicon Graphics ICE XA, Руководство пользователя по оборудованию, Страница: 37 / 96

Поделиться
Скачать
Silicon Graphics ICE XA Скачать руководство пользователя страница 37

System Power Status

007-6399-002

19

Chassis Management Control (CMC) Functions

The following list summarizes the control and monitoring functions that the CMCs perform. Most 
functions are common across multiple blade enclosures:

•

Controls and monitors blade enclosure fan speeds 

•

Reads system identification (ID) PROMs 

•

Monitors voltage levels and reports failures 

•

Monitors the On/Off power sequence

•

Monitors system resets 

•

Applies a preset voltage to switch blades and fan control boards

System Power Status

The 

cpower

 command is the main interface for all power management commands. You can 

request power status and power-on or power-off the system with commands entered via the 
administrative controller server or rack leader controller in the system rack. The 

cpower 

commands are communicating with BMCs using the IPMI protocol. Note that the term “IRU” 
represents a single blade enclosure within a rack. This is a legacy identification from the ICE 
“individual rack unit” (IRU) nomenclature. 

Note that system-level power-up commands are applied first to service nodes, then to RLCs, then 
to blade enclosures and compute blades. 

The 

cpower

 commands may require several seconds to several minutes to complete, depending 

on how many blade enclosures are being queried for status, powered-on, or turned off. 

# 

cpower system status

This command gives the status of all compute nodes in the system.

To power on a specific blade enclosure, enter a command similar to the following:

# 

cpower iru on r1i0

In this example, the system should respond by powering on the IRU (blade enclosure) 0 nodes in 
rack 1. Note that this command does not power-on the system administration (server) controller, 
rack leader controller (RLC) server or other service nodes.

Содержание ICE XA

































































































Отзывы:

Нет отзывов