![Silicon Graphics GDM-4011P Скачать руководство пользователя страница 15](http://html.mh-extra.com/html/silicon-graphics/gdm-4011p/gdm-4011p_service-manual_1271605015.webp)
GDM-4011P
• INSTALLED POSITION OF THE ANODE-CAP
•
Install the anode cap as shown a figure.
3
When one side of the rubber cap is
separated from the anode button, the
anode-cap can be removed by turning
up the rubber cap and pulling up it in the
direction of the arrow
c
.
• HOW TO HANDLE AN ANODE-CAP
1
Don’t hurt the surface of anode-caps with shartp shaped material!
2
Don’t press the rubber hardly not to hurt inside of anode-caps!
A material fitting called as shatter-hook terminal is built in the
rubber.
3
Don’t turn the foot of rubber over hardly!
The shatter-hook terminal will stick out or hurt the rubber.
a
b
c
Anode Button
• REMOVAL OF ANODE-CAP
NOTE: Short circuit the anode of the picture tube and the anode cap to the metal chassis, CRT shield or carbon painted on the CR
T, after
removing the anode.
• REMOVING PROCEDURES
1
Turn up one side of the rubber cap in
the direction indicated by the arrow
a
.
2
Using a thumb pull up the rubber cap
firmly in the direction indicated by the
arrow
b
.
Anode cap
Purse lock
Deflection yoke
Top cover
TOP VIEW
2-5