![Silicon Graphics External DVD Drive Скачать руководство пользователя страница 5](http://html.mh-extra.com/html/silicon-graphics/external-dvd-drive/external-dvd-drive_installation-manual_1271597005.webp)
SGI™ External DVD Drive Installation Guide
3
2. Attach one end of the separate power cable to the power adapter, and attach the
other end to a working electrical wall outlet.
Caution:
The power adapter and cable are designed and tested to work with your SGI
external DVD drive. Use of an AC power adapter not approved by SGI for the unit may
cause malfunction or may void your warranty.
Manufacturer’s Regulatory Declarations
Caution:
This device has several governmental and third-party approvals, licenses, and
permits. Do not modify this product in any way that is not expressly approved by Silicon
Graphics. If you do, you may lose these approvals and your governmental agency
authority to operate this device.
The device conforms to several national and international specifications and European
Directives listed on the Manufacturer’s Declaration of Conformity. The CE insignia
displayed on each device is an indication of conformity to the European requirements.
CMN Number
The drive model number, or CMN number, is on the system label on the bottom of the
drive.
To obtain the Manufacturer’s Declaration of Conformity from SGI, you must either
provide the CMN number to your local SGI sales representative, or, contact the Technical
Assistance Center at 1-800-800-4SGI.
Class A Compliance
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a