Silicon Graphics C220, Руководство пользователя, Страница: 8 / 17

English
English-3
To attach the monitor to your system, follow these instructions:
1. Turn off the power to your computer.
2. Connect one end of the signal cable to the connector of the display card in your system (Figure A.1).
Tighten all screws.
3. Connect the other end of signal cable connector on the back of the monitor.
NOTE: Incorrect cable connections may result in irregular operation, damage display quality/components of CRT monitor.
4. Connect one end of the power cord to the AC inlet on the back of the monitor and the other end to the power outlet (Figure
B.1).
5. Turn on the monitor (Figure C.1).
6. Turn on the Computer.
NOTE: If you have any problems, please refer to the Troubleshooting section of this User’s Manual.
Figure A.1
Figure C.1
Figure B.1
Quick Start
15-pin mini D-SUB
Detachable Signal Cable