Silicon Graphics 230, Руководство пользователя

Страница: 71 / 148

Post-installation Instructions
007-4263-001 55
2. Follow these steps to replace the side panel:
• Locate the two tabs on the lower side of the side panel.
• Place the two tabs onto the lower chassis rail.
• Slide the side panel toward the rear of the system, until the rear tab hits the rear
of the chassis and the side panel cannot be moved any farther. Figure 2-32
illustrates the procedure.
Figure 2-32 Placing Side Panel onto Lower Chassis Rail
• Push the upper side of the side panel toward the chassis.
• Gently lift the side panel and push it against the chassis.
Side panel tabs
1
2
2
1