Switch on the power of camera, then the signal light (red) of the
power will lighten, 5 seconds later the working light (blue) will lighten,
now the camera is on working condition
3.
connect to video
camera
Switch on WLAN of your mobile devices, and find the wifi connector
named “Q7” in your wifi AP list
Try to connect Q7 (12345678 password)
Open “
plug2view
” which you already installed, then software will
enter into camera list automatically, as shown in figure below:
After 2 seconds, it will show that your camera is in the list which
means it connects successfully
Click video camera can enter video screen
Set
wifi
information
Several seconds after starting up, the blue and red lights will lighten at the
same time, open your setting area in your mobile devices-----wifi and
network----WLAN setting----find Q7 and connect it. Back to main
interface and open our software--- then change the name (also
can change your video camera name)----password (only when the net is
on)----wifi connector----enter your wifi password---save---setting your wifi
information successfully and logout. After you have done all the settings
above, trun off camera power and restart to complete your setting.
1
、
network state--- Infinite distance recording (support more than one mobile
phone to watch at the same time )
Turn the point-to-point and network switch to the network status (MODE
switch)---- open the camera----light turns red, after several seconds blue
light lighten, open the phone software (cell phone must open the WIFI
network or GPRS)----- click to register a new account
-----fill in the user account------ email address (recommended to fill in,
convenient in later retrieve password when lost password)---- mobile phone--
---- user password (please remember well after input) and then click
register new account, after the completion of the registration back to user
login interface, enter the user account and password, click the user login
click to add a new camera to fill in the name of the camera (optional),
camera ID number and camera password, click on add camera, when
completed, add success automatically return the camera list interface, see the
user ID at this time
There are three icons under the video , the first one is for taking
pictures, click to make it work (the pictures you took will save in sub-file
named snapshot in a file in your TF card first, otherwise it will save in your
own phone RAM), the second one is for recording, click to record and click
again to save what you have recorded(save in sub-file named record in a file
