11
Trouble Shooting
Problem
Possible Cause
What to do
be blown or the circuit
Plug not fully inserted into
Make sure the 3-prong plug is fully
Cabinet Temperature
Temperature setting
Verify the temperature control setting.
Door not shut properly
Ensure that the door is fully closed
needed and for short periods of time
Exhaust vent is obstructed
Verify there is nothing blocking the
Recently added a large
Limit the quantity of warm bottles
quantity of warm bottles
being introduced to the cabinet at the
to the cabinet
same time. Attempt to stagger the
Condensation on the
High humidity conditions
The condensation will subside once
Door not shut properly
Ensure that the door is fully closed
needed and for short periods of time
“Clicking” Noise
“Clicking” Noise Normal sound No user intervention is required as
this sound is normal during the operation
of the appliance. This audible
‘clicking’ noise may be heard as the
wine cooler ends or begins a cooling
breaker tripped
Power surge
Unplug the Wine Cooler, wait a
wall outlet
inserted into outlet
few seconds and then plug it back in
No Power
A fuse in your home may
Replace fuse or reset circuit breaker
too High
Adjust if neccessary
load introduction if possible
cycle
cabinet and/or doors
in the home
humidity conditions return to normal
or opened excessively
and that the gasket is sealing against
front mounted exhausting vent
or opened excessively
and that the gasket is sealing against
the cabinet. Open the doors only as
the cabinet. Open the door only as
Occasionally, a problem is minor and a service call may not be necessary - use this trouble shooting
guide for a possible solution. If the unit continues to operate improperly, call an authorized service
depot or Danby's Toll Free Number 1-800-263-2629.
