Silex technology BR-330AC-LP, Руководство пользователя

Страница: 67 / 106

5. List of Functions
61
3.
Enter the MAC address of the non-wireless device (the one you want to use wirelessly
using BR-330AC-LP) to
Network Device Address
under
IEEE802.1X Network Device
Configuration , and click Submit .
- The following MAC addresses cannot be used for this setting:
- Broadcast address
- Multicast address
- The address composed of 12 zeros
- Duplicated address (when operating in Multi-Client Mode)
Note
- When the IEEE802.1X authentication is used, access to the BR-330AC-LP from non-wireless devices needs
to be restricted so that access from unauthorized devices can be blocked.
- The BR-330AC-LP bridges only the devices whose MAC address is registered to
Network Device Address
.
Check the MAC address of the non-wireless device to bridge and register it to Network Device Address .
- Please configure this even when you connect only one non-wireless device in a Single Client Mode .
- In
Multi-Client Mode
, register the MAC addresses of all non-wireless devices connected to the BR-330AC-
LP (up to 16 addresses).
TIP
4.
When the confirmation message is displayed, click
Restart
to restart BR-330AC-LP.
5.
The BR-330AC-LP will be restarted and the IEEE802.1X authentication will take effect.
The configuration has now been completed.
Turn off the BR-330AC-LP and connect it to the non-wireless device using a LAN cable.
Refer to
Connecting Non-wireless Devices
for details.