Silex technology AP-415AN Скачать руководство пользователя страница 10

Страница: 10 / 126

AP-415AN User's Guide

Warning

* In the following cases, turn off the connected devices and unplug the AC plug of this

product from a power outlet. Failure to follow these instructions may cause fire or an

electrical shock.

- When this product emits a strange smell, smoke or sound or becomes too hot to

touch.

- When foreign objects (metal, liquid, etc.) gets into this product.

- When this product is dropped or the case is broken or cracked.

* Do not disassemble or modify this product. It may cause fire, electrical shock or

malfunction.

* Do not disassemble or modify the AC adaptor that came with this product. It may

cause fire, electrical shock or malfunction.

* Do not cover up the vents on this product. The temperature inside may rise and

cause fire or malfunction.

* Do not place any objects on top of this product. It may cause fire, electrical shock or

malfunction.

* Do not place any objects on top of this product. It may cause fire, electrical shock or

malfunction.

* Do not roll up or wrap the AC cord. It may cause fire or an electrical shock.

* Do not plug or unplug the AC adaptor or any other cables with wet hands. It may

cause an electrical shock or malfunction.

* Keep the small parts out of reach of young children. If these are swallowed, consult a

doctor immediately.

* For use of the devices connected to this product, please follow all warnings, cautions

and notices given by that manufacturer and carefully use them in a proper manner.

* Failure to follow these instructions may cause fire, electrical shock or malfunction.

* Use the correct power voltage. Improper voltage may cause fire or an electrical

shock.

* If a ground wire is supplied with your device to use with, connect it to the ground

terminal in order to prevent an electrical shock. Do not connect the ground wire

to gas pipe, water pipe, lighting rod or telephone ground wire. It may cause

malfunction.

* Keep the cords and cables away from children. It may cause an electrical shock or

serious injury.

Содержание AP-415AN






























































































































Результаты поиска

Содержание AP-415AN

Отзывы:

Бренды по названию

Популярные бренды

Silex technology AP-415AN, Руководство пользователя

Результаты поиска

Содержание AP-415AN

Отзывы:

Бренды по названию

Популярные бренды