TX-400-MOBI
6 - ENGLISH
LEM International S.r.l. - Corso Monte Cucco 71/A - 10141 - Turin - Italy - VAT IT10762880010 - All Rights Reserved ®
Being the transmitter intended for mobile use
mainly, make sure that the battery is sufficiently
charged to sustain the desired activity.
Please note that
the maximum battery life is
approximately 8-10 hours
and, over the time,
due to the natural deterioration of lithium it may
reduce.
It is advisable to recharge the battery in
environments with temperatures between 10° C
and 30° C.
Charging in other environments may
not be as effective.
Power Supply &
Charging
Make sure that the
Micro-USB Cable
(Pic. 2) is
connected to a wall power supply (not included
in the package) and to the dedicated port (Pic. 1)
located on the RIGHT SIDE of the transmitter.
Pic. 2 - Micro-USB Cable
To find out the state of the charge, observe the
Status LED
(Pic. 1) which will be red when
the charge percentage drops below 20% and
during the charging procedure till 75%, while it
will be green with sufficient charge and when
charging is complete.
Powering On/Off
To turn on the transmitter, simply
press and hold
the ON / OFF button located on the TOP SIDE of
the transmitter
. As soon as the transmitter is
correctly switched on, the
DISPLAY (Pic. 6) on
the front (Pic. 1) will show the channel on which
the transmitter operates
.
Consequently, to proceed with the shutdown,
proceed by exerting the
same pressure on the
ON / OFF button
.
Audio Source
Whatever audio source you want to transmit, it
must be connected to the
Audio Input
on the
SUPERIOR SIDE
of the transmitter (Pic. 1).
This means that if you have another type of
connector, you will need an adapter. Usually
most devices have a 3.5 mm output, so you
can use the AUX cable included in the package
(Pic. 3).
Battery
