TX-300-MOBI
8 - ENGLISH
LEM International S.r.l. - Corso Monte Cucco 71/A - 10141 - Turin - Italy - VAT IT10762880010 - All Rights Reserved ®
Channel Selection
With the device turned on, the audio source and
the microphone connected properly, by pressing
the
Channel Selector
located on the
UPPER
SURFACE
(Pic. 1) it is possible to switch from one
channel to another.
The integrated
Display
works as an identifier of
the transmission channel.
Pic. 6 - Transmitter Display
The same channel has to be selected on the
headphones to hear what is being broadcasted.
Bluetooth
The
Bluetooth Activation
button accessible on
the
UPPER SURFACE
of the transmitter allows
you to use a wireless audio source.
For each device that the user intends to use, it is
necessary to carry out the
“Pairing”
procedure
on a one-off basis.
By pressing and holding the
Bluetooth Activation
button
(with Bluetooth off), the
LED
located near
the key will begin to flash alternating between
red and blue colors. At this point, from the
dedicated menu on the device which you want
to use as Audio Source, select the
TX-300-MOBI
item, and the
LED
once paired with the device
will set on the blue color .
Once the pairing procedure is completed, to
turn off the Bluetooth, as well as to turn it on
again, simply press the dedicated button for a
few seconds, when the static LED is on the blue
color .
Notes
There is a clip on the back of the transmitter
to secure it comfortably during physical activity.
However, we recommend using a dedicated
pouch or backpack.
It may be that some transmitters have a USB
port on the SIDE intended for the various
connectors. This has the sole purpose of solving
problems (debug) in case of malfunctions;
therefore it is not to be considered as Input for
the transmitter.
